Advanced

Features:

Split tests cable length: Min. 1.2M (about 4 feet) 150M (about 492 feet)
Can identify the following faults: open, short, crossed, reversed,

Can identify up to 4 different cables on the other end by using 4 provided remote identifiers
Simple and effective use
A large display LED and 4 wire LEDs clearly display fault status
Designed with one 9V DC battery for longer and easy replacement

Features:

All-in-one: Tester, Tone generator, and Portfinder
Compatible with most, cable tracers on the market
Pin-to-pin LED indicators
Local loopback test, open, shorts, miss-wire
Remote terminator for testing pre-installed cables
Auto-scan or manual step testing in forward, backward and stop sequences
Accessories to test video(F connector) and RJ11 telephone cable

Features:

All-in-one tester: Cable tester, Tone generator Port finder and Cable organizer
Manual step testing in forward, backward and stop sequences
18 remotes IDs for organizing up to 18 cables locations
Other features are same as Netfinder

Features:

Tests for wiring faults of open, short, reversal, crossed and

Split pair fault detection at minimum 40cm cable length
Verification of shield integrity
Specially designed remote units that enables one person to test installed cables
Easy to read fault display and high speed testing
Debug mode and detailed fault identification results
Auto sleep mode and power off switch to decrease power
Low battery indicator

Features:

Detects open, short, reversal, miss-wire and even the split pairs
Additional model is available with built in tone generator
Button operation (2 buttons on model with tone generator)
Interface with both RJ45 Socket (female) and Plug (male) on main and remote unit to provide easy connection. Eliminates the need for cable adaptors
Snap-on remote unit allows quick access and storage
Low battery indicator
Compatible with Category 3,4,5. 5e and 6 cables

Features:

All-in-one tester: Tests net and telephone cables. Includes tone generator, portfinder, cable organizer,

Tests for the following wiring faults: opened, shorted, reversal, crossed, and split pairs
Pin-to-pin indication (net cable)
Tests for wiring faults of short and open (telephone cable)
Verification of shield/ground integrity
Split pair fault detection at a minimum 3M cable length
Tests for twisted pair cables to over 490ft (150M)
Tone generator function is compatible with most cable tracers on the market
Cable organizer: 8 numbered remote IDs for organizing 8

Port finder: Locates the HUB/Switch for the corresponding port
Quick test: Memorizes a cables pin out and tests for

Remote unit enables one person to test installed cables
Easy to read alphanumeric LED faults display
Low battery indicator

The NETest Network Cable Tester is a simple but comprehensive cable tester that will diagnose
wiring faults for 10BASE2 (Coax), 10BASE-T, 100BASE-Tx, TIA-586A, TIA-568B Token Ring cables. It will not only identify wiring faults such as open wires, shorts, reversed
pairs, crossed pairs, split pairs and miswiring, but also will identify up to 4 different cables from
the tested end. With a push of button, the NETest will automatically scan all wires and pairs
to determine any existing faults. A large alphanumeric LED displays the fault code; while a
series of smaller LEDs indicate which pair the fault is existent on. For testing of installed cables,
4 remote terminators are provided. The terminators are also used to identify which cable is
being tested.

NETfinder is the latest generation of the LANtest family, with an advanced circuit design
surpassing the original technology, NETfinder is the perfect companion to network
professionals and students, for commercial and residential applications.

NETfinder is designed to enhance users' ability to quickly locate and verify the status of
common and standard voice and data cables. It combines the functions of a convenient
cable tester with a built-in low emission frequency "TONE" generator.

NETfinder is also equipped with PORTfinder function to trace a cable back to the hub/switch.
With NETfinder, cable tracing and testing is now ONE easy step.

The LANtest Pro is a small hand held tester that enables the user to quickly read the status
of Ethernet twisted pair cables. It tests for faults such as open circuit, shorts, crossed pairs,
reversed pairs and split pairs in seconds. The Tone Generator function can send a signal
through your installed cables and the probe can then trace to locate the fault.

SMARTest is the first open style tester on the market. It is designed for convenience to the
network professional. Its design is lightweight yet rugged, perfect for field jobs. SMARTest's
2 button operation makes it quite easy to use and it's remote unit allows for testing of
cables both before and after installation. SMARTest detects the following faults: shorts, opens,
crossed pairs, reversal, and split pairs.

The LANtest Pro is a small hand held tester that enables the user to quickly read
the status of Ethernet twisted pair cables. It tests for faults such as open
circuit, shorts, crossed pairs, reversed pairs and split pairs in seconds. The Tone
Generator function can send a signal through your installed cables and the
probe can then trace to locate the fault.

The LANtest Pro/IDT includes one master unit and four remote units easily operated
by one person testing patch cords or installed cables.

HOBBES USA CORP.

{company tag line}